DMX USB interface Enttec Pro Compatible

DMX USB interface Enttec Pro Compatible DMX512 Dongle DMX Dongle USB DMX512 Controller DMX512 computer controller

DMX USB interface  Enttec Pro CompatibleDMX512 DongleDMX DongleUSB DMX512 ControllerDMX512 computer controller

DMX USB Interface/ USB DMX Dongle / USB to DMX Adaptor
Galvanic isolation (security for your computer)
DMX-USB-Pro is a DMX USB interface, USB DMX dongle, USB to DMX Adaptor for below softwares:
(1)	Vixen			www.vixenlights.com
(2)	Light Show Pro			www.lightshowpro.com
(3)	Visual Show Automation			www.brookshiresoftware.com
(4)	xLights			http://sourceforge.net/projects/xlights/
(5)	Q Light Control			http://qlc.sourceforge.net/
(6)	Light-O-Rama			http://lightorama.com/
DMX-USB-Pro is Enttec USB Pro compatible for above softwares which means DMX-USB-Pro uses the same Enttec USB Pro plug-in/hardware settings in above softwares.
We recommend you to use Enttec USB Pro if your budget is relatively well-off as the Enttec USB Pro supports more softwares. You can find more details from Enttec USB Pro's official website:
www.enttec.com
Product Brief
(1)	DMX USB Interface / USB DMX Dongle / USB to DMX Adaptor
(2)	Micro processor enabled
(3)	1500V full isolation (data & power lines to protect your computer from surges)
(4)	1 Output connector (XLR 5-pin or 3-pin as DMX512 output port)
(5)	Internal frame buffering
(6)	Drivers for Windows, OSX and Linux
(7)	Enttec USB Pro compatible for below Softwares:
	Vixen
	Light Show Pro
	Visual Show Automation
	xLights
	Q Light Control
	Light-O-Rama
(8)	Size: 9cm*5.7cm*2.2cm; Total length 70cm including USB & XLR cables.

Installing DMX-USB-Pro
Installing Driver
The DMX-USB-Pro is supported by drivers for the following Operating Systems:
	Windows 7 / Vista / XP / 2000 / 98 / ME
	Apple OSX (Power PC)
	Apple OSX (intel)
	Linux
You can find the driver files in the CD-ROM or you can download the drivers from Enttec's website:
http://www.enttec.com/index.php?main_menu=Products&pn=70304&show=drivers
Hereby we illustrate how to install driver for Windows for example.
Firstly, double-click and run CDM20824_Setup.exe in the CD-ROM\drivers\Windows 7 Vista XP 2000\ directory in order to install the VCP (Virtual COM port) drivers for FTDI devices.
** Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the same way as it would access a standard COM port.
Secondly, you may now plug in the DMX-USB-Pro to any available USB port in your computer. You may also plug the DMX-USB-Pro into a USB hub, but when doing so be sure that enough power exists on that hub to provide for the device and all other power-over-USB devices plugged there as well.
When you make the connection to your computer, a few seconds may pass before anything happens. After that, a message should appear saying your computer has detected new hardware and the new hardware (DMX-USB-Pro) will be installed automatically. And then the LED indicator on the DMX-USB-Pro starts to blink as the new hardware is ready for use.